surface morphology and roughness of the films was observed by field emission scanning electron microscopy (FE-SEM, Model: JSM-6701F) and atomic force microscopy (AFM, Digital Instrument, nanoscope III) operated at room temperature, respectively. The electrical properties of the films were determined using Hall measurement system (Van der Pauwconfiguration, Hilton, Australia) at room temperature.
1. 실험목적
피로시험기의 측정원리를 알고, 재료의 피로응력 사이클의 형태를 이해한다. 또, S-N곡선을 조사하고 응력비 R에 따라서 수명에 어떤 영향이 있는지 파악한다.
2. 피로파괴 이론
1) 피로파괴
단일 하중에 의해 일어나는 응력보다 낮은 하중은 반복해서 받을 경우에 발생되는 파괴로
2. Main discourse
2.1 highrises building builds through some process.
Good new construction method of constructions and systematic construction order are required in plan as building which cause particular condition that is different from universal condition preservation and administration side design and space-time in general building and with use.
In highrise building systematic and basic
(1) Project Objective
To develop a new commercial product that is valuable, feasible, and practical in the real market.
(2) Deciding The Market for The New Product
In this world, there are myriad markets, consumers, products. However, considering our company's technologies(internal factor) and marketability(external factor), we chose the market of kitchen utensils for our new product.
(1) UV 경화형 도료의 역사
UV 경화형 도료의 UV는 Ultra Violet의 약자로, 자외선 조사장치 등으로부터 나오는 자외선의 화학 작용에 따라 비교적 초단시간 내에 경화되는 도료를 말한다. 최초의 것으로 남아있는 기록으로는 고대에 미이라에 역청질 물질을 배합한 Lavender oil을 바른 마포를 태양광선에 경화
표면 거칠기의 정의 (1)
표면 거칠기(Surface roughness)는 가공 과정에서 필연적으로 발생하는 규칙적이거나 불규칙적인 요철을 말한다.
기계 부품이 요철이 없는 이상적인 표면을 갖도록 제작하는 것은 생산공학적으로 불가능하며, 필요 이상으로 표면을 매끄럽게 다듬는 것은 비경제적이다.
그러므
Ⅱ. Discussion
이번 실험의 목적은 기판의 roughness와 표면처리에 따라서 접촉각이 어떻게 변하는지 관찰하고 이를 바탕으로 부착일과 Critical Surface Tension을 구하는 것이었다. 실험에 앞서 contact angle이란, 기판 위에 형성된 액적에 대해 고체, 액체, 기체 세 개의 상이 만나는 점에서의 고체표면과 액체표면
Purpose of Experiment
Understanding experimental
analyzing method from XRD
Understanding
application of XRD
Understanding
Principle of XRD
Understanding and analyzing of XRD perfectly
Reason of Error
Impurities
Sample
Roughsurface
→ Having to fix x,y,z axis
Non uniform powders
→ Changing surface
Geometrical structure factor
High stress
→Distortion, screw.
-Surface Roughness란?
표면의 거칠기를 나타내는 성질로 표면조도라고도 한다.
내열 유리의 경우
표면이 거칠기 때문에
식기 표면의 오염을 막기 위해서!!
설거지의 편리성을 위해서!!
중요한 성질이라고 할 수 있다.
Eucryptite
소결 특성이 우수하고 음의 열팽창 계수를 가지고 치밀한 구조,
2. Discuss
- Probe experiments at the hands of the participants so the experiment result can be errors.
- As in the case of the specimen in contact with the probe is part of the specimen uneven or roughsurface causing the problem occurs.
- The specimen could never achieve exactly perpendicular with probe so the error can be occur